Cannondale Derailleur Hangers

The derailleur hanger is a part of the frame, not of the derailleur. There are many different brands of bike in the world, made in many different factories, and finding the right hanger for a bike is not always easy.

A visual check will generally be enough to find the hanger you need, but we have also included information from Wheels Manufacturing (who's range of hangers we keep in stock) regarding which models of bicycle each hanger fits. This information was updated in January 2013, so will not cover later model years until this site is updated. Please use the model listing as confirmation only of your choice of derailleur hanger; a visual comparison should be the primary way to get the correct hanger.

If you can't find the hanger you're after on this brand-specific page, or can't find your brand of bike listed, then try your luck in the All Derailleur Hangers page - but beware - there are almost 200 hangers there.

Chances are we'll have the hanger you need, but, sadly, there will always be some bikes out there with hangers we do not carry, and for which Wheels Manufacturing don't make a replacement. In these cases, please refer to a dealer in the relevant brand of bike.

Cannondale Derailleur Hanger Flash 4

Cannondale Derailleur Hanger to Suit Flash 4 mountain bike.
This hanger attaches on both sides of the frame and is held in place by two small screws. Take care doing these up - it's very easy to strip the threads. We know from experience. Weight: 12g.

Wheels Manufacturing Derailleur Hanger 17

Special Order
Fits some bicycle models from Cannondale.

PLEASE NOTE: We no longer hold this derailleur hanger in stock, but should be able to get it for you if you order it from us. Please allow an extra week for delivery.

Weight (including attachment hardware): 18g.

Wheels Mfg Derailleur Hanger 18

Fits some bicycle models from Cannondale.


Weight (including attachment hardware): 21g.

Wheels Manufacturing Derailleur Hanger 19

Fits some bicycle models from Cannondale.

SPECIAL ORDER ITEM - please note we no longer keep this item in stock but should be able to get it for you if needed. Please allow an extra week or two for despatch.

Weight (including attachment hardware): 23g.

Wheels Mfg Derailleur Hanger 91

Fits some bicycle models from Cannondale and Parkpre.


Weight (including attachment hardware): 28g.

Wheels Mfg Derailleur Hanger 110

Fits some bicycle models from BH and Cannondale.


Weight (including attachment hardware): 15g.

Wheels Mfg Derailleur Hanger 162

Fits some bicycle models from Cannondale.


Weight (including attachment hardware): 11g.