Shimano Disc Brakes and Spares
For Shimano disc brake pads, click here.
For use with Shimano's integrated reservoir levers (eg BL-M575)
Bleed screw with O-ring from Shimano BL-M666 hydraulic brake lever.
Economical and quick and easy to set up, Shimano's pre-bled BR-M395 hydraulic disc brake with BL-M396 lever provides a ready solution to the problems that some ageing disc brake setups can give. This front brake has a right-hand lever and a 1 metre hydraulic hose.
NOTE - DISC ROTOR AND MOUNT ADAPTORS NOT INCLUDED.
Steel brake lever. Bleeding nipple position changed for ease of maintenance. Mounting bolts, spare olive and barb and plastic hose clamp included. Weight: 296g. Shipping Weight: 561g.
Steel brake lever. Bleeding nipple position changed for ease of maintenance. Mounting bolts, spare olive and barb included. Weight: 311g. Shipping Weight: 571g.
This is the bit that screws into the disc caliper to prevent the brake pads from falling out. It can be fitted as an upgrade to some Shimano disc calipers that use a split pin, as long as the outer hole has a thread. (Some SLX calipers).
Shimano Part Number: Y8JA98010. Weight: 4g.
Suitable for hydraulic brake systems that use mineral oil (ie Shimano, Tektro). NOT suitable for brakes that use brake fluid!
This adaptor can be used to fit an 8" Saint Disc & Caliper to a Fox 40 fork. Shipping Weight: 100g.
This adaptor is interchangeable with the Hayes Mount Adaptor Front I60mm which is on special.
This adaptor is interchangeable with Shimano's SM-MA-F160-PS Mount Adaptor.
Bolts and washers for attaching adaptor to fork are included with the adaptor.
This adaptor also works with Hayes brakes. (180mm rotor). Shipping Weight: 100g.
2 attachment bolts included. This adaptor also works with Hayes brakes (203mm rotor).
Shipping Weight: 87g.
This adaptor is interchangeable with the Hayes Mount Adaptor Rear IS 160mm which is on special.
Shipping Weight: 100g.
This mount adaptor is interchangeable with Shimano's SM-MA-R160-PS mount adaptor.
6" centrelock disc rotor for use with resin pads only.
Made in Malaysia.
Weight: 134g. Shipping Weight: 227g.
Shimano SM-RT64 SLX Centrelock Disc Rotor 180mm with alloy lock ring.
New design rotor. 12g lighter than SM-RT62.
Weight: 179g. Shipping Weight: 271g.
Shimano Part Number: ISMRT66S. Suitable for metal pads as well as resin pads.
Shipping Weight: 200g.
Use in a vise to clamp hydraulic brake hoses for cutting or inserting fittings.
Moruya Bicycles. ABN 27 559 728 517. 10 Ford St Moruya NSW 2537 Australia.